View 2432-002-X7R0-102M_451218.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct.
Catalog 4000R7 Part 2 Revised 4/10/07
#4-40 UNC-2A Pi & C Filters
Large Hex
.156 .010 [3.96 0.25] .120 .005 [3.05 0.13] .240 .020 [6.10 0.51] .360 .020 [9.14 0.51] .220 .010 [5.59 0.25]
Small Hex
.125 .010 [3.18 0.25]
.190 .020 [4.83 0.51]
.410 .020 [10.41 0.51] .140 .010 [3.56 0.25]
.075 .005 [1.91 0.13]
.030 MAX. [0.76 MAX.]
STYLE 1
.038 MAX. [0.96 MAX.]
.030 MAX. [0.76 MAX.] # 4- 40 UNC - 2A
STYLE 2
.060 MAX. [1.52 MAX.]
.060 MAX. [1.52 MAX.] # 4- 40 UNC - 2A
inches [mm]
Capacitance (pF)
Capacitance Tolerance
Lead TUSONIX Dia. Part Number Pi Configuration 1 .018 [.46] 4261-001 1 .018 [.46] 4200-012 C Configuration 2 .030 [.76] 4403-035 1 .020 [.51] 4400-005 1 .030 [.76] 4400-035 2 .020 [.51] 4403-005 1 .020 [.51] 4400-006 1 .030 [.76] 4400-036 2 .020 [.51] 4403-006 2 .030 [.76] 4403-036 1 .020 [.51] 4400-010 1 .030 [.76] 4400-040 2 .020 [.51] 4403-010 2 .030 [.76] 4403-040 1 .020 [.51] 4400-016 1 .030 [.76] 4400-041 1 .020 [.51] 4400-003 1 .030 [.76] 4400-033 2 .020 [.51] 4403-003 2 .030 [.76] 4403-033 1 .020 [.51] 4400-004 1 .030 [.76] 4400-034 2 .020 [.51] 4403-004 2 .030 [.76] 4403-034 1 .030 [.76] 4400-680 2 .030 [.76] 4403-680 1 .020 [51] 4400-008 1 .030 [.76] 4400-038 2 .020 [.51] 4403-008 2 .030 [.76] 4403-038
Style
Circuit
85C 125C --70 70 70 70 70 70 70 70 70 70 70 70 50 50 150 150 150 150 150 150 150 150 300 300 300 300 300 300 50 200 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 200 200 200 200 200 200
Current (A)
Working Voltage (dc)
Minimum No-Load Insertion Loss (dB) at 25C per MIL-Std-220 1MHz --4 4 4 4 7 7 7 7 10 10 10 10 15 15 --------------10MHz 14 5 21 21 21 21 20 20 20 20 28 28 28 28 35 35 10 10 10 10 15 15 15 15 ------100MHz 55 42 35 35 35 35 35 35 35 35 42 42 42 42 45 45 25 25 25 25 30 30 30 30 ------1GHz 70 70 50 50 50 50 55 55 55 55 65 65 65 65 70 70 40 40 40 40 45 45 45 45 --5 5 5 5 10GHz --60 60 60 60 60 60 60 60 65 65 65 65 --50 50 50 50 55 55 55 55 --20 20 20 20
Pi Pi C C C C C C C C C C C C C C C C C C C C C C C C C C C C
5500 1500 10,000 10,000 10,000 10,000 15,000 15,000 15,000 15,000 27,000 27,000 27,000 27,000 50,000 50,000 2700 2700 2700 2700 5000 5000 5000 5000 5 5 10 10 10 10
GMV -0,+100% GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV MAX MAX GMV GMV GMV GMV
3 3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Drawings not to scale.
All bushing style filters include hex nut and lock washer unless otherwise noted.
13
7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com
#4-40 UNC-2A C & L Filters
TUSONIX 4400 Series Miniature EMI Filters
These filters are ideal for applications where small size and high performance are critical and a threaded mounting technique is desired. These C and L configured filters are available in two physical configurations and can be supplied with either unified or metric thread (see page 18 for metric). The small package and large range of electrical characteristics of the 4400 Series make it an effective solution for a variety of microwave applications.
Capacitance (pF) Capacitance Tolerance
85C 125C C Configuration (Continued from page 13) 4400-009 1 .020 [.51] C 300 200 4400-039 1 .030 [.76] C 300 200 4403-009 2 .020 [.51] C 300 200 4403-039 2 .030 [.76] C 300 200 4400-000 1 .020 [.51] C 300 200 4400-030 1 .030 [.76] C 300 200 4403-000 2 .020 [.51] C 300 200 4403-030 2 .030 [.76] C 300 200 4400-001 1 .020 [.51] C 300 200 4400-031 1 .030 [.76] C 300 200 4403-001 2 .020 [.51] C 300 200 4403-031 2 .030 [.76] C 300 200 4400-007 1 .020 [.51] C 300 200 4400-037 1 .030 [.76] C 300 200 4403-007 2 .020 [.51] C 300 200 4403-037 2 .030 [.76] C 300 200 4400-002 1 .020 [.51] C 300 200 4400-032 1 .030 [.76] C 300 200 4403-002 2 .020 [.51] C 300 200 4403-032 2 .030 [.76] C 300 200 L Configuration 4400-055 1 .020 [.51] L 70 50 4400-056 1 .020 [.51] L 70 50 4400-060 1 .020 [.51] L 70 50 4400-057 1 .020 [.51] L 50 50 4400-053 1 .020 [.51] L 150 100 4400-054 1 .020 [.51] L 150 100 4400-050 1 .020 [.51] L 300 200 4400-051 1 .020 [.51] L 300 200 4400-052 1 .020 [.51] L 300 200
Circuit
Style
TUSONIX Part Number
Lead Dia.
Current (A)
Working Voltage (dc)
Minimum No-Load Insertion Loss (dB) at 25C per MIL-Std-220 1MHz --------------------4 7 10 15 -----10MHz ------------5 5 5 5 5 5 5 5 21 25 28 35 10 15 --5 100MHz ----3 3 3 3 15 15 15 15 20 20 20 20 20 20 20 20 35 40 45 52 25 30 3 15 20 1GHz 10 10 10 10 20 20 20 20 35 35 35 35 35 35 35 35 35 35 35 35 55 60 65 70 40 45 20 35 35 10GHz 25 25 25 25 28 28 28 28 40 40 40 40 45 45 45 45 45 45 45 45 70 60 70 -55 60 33 45 50
25 25 25 25 100 100 100 100 500 500 500 500 1000 1000 1000 1000 1200 1200 1200 1200 10,000 15,000 27,000 50,000 2700 5000 100 500 1200
GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Drawings not to scale.
Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted.
14
The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct.
#6-40 UNF-2A EMI Pi Filters
inches [mm]
.125 .015 [3.17 0.38]
.290 .031 [7.37 0.79]
.950 .031 [24.13 0.79]
.125 .015 [3.17 0.38]
.290 .031 [7.37 0.79]
.950 .031 [24.13 0.79]
# 6- 40 UNF - 2A .156 .015 [3.96 0.38] # 20 AWG. (.032) [0.81] .130 .015 [3.30 0.38] .156 .015 [3.96 0.38]
# 6- 40 UNF - 2A
.130 .015 [3.30 0.38]
.220 .015 [5.59 0.38]
.220 .015 [5.59 0.38]
# 20 AWG. (.032) [0.81]
STYLE 1
STYLE 2
Circuit
Style
85C 300 300 300
125C 200 200 200
Current (A)
TUSONIX Part Number Pi Configuration 4200-000 4200-002 4200-005 Drawings not to scale.
Working Voltage (dc)
Capacitance (pF)
Capacitance Tolerance
Minimum No-Load Insertion Loss (dB) at 25C per MIL-Std-220 10MHz 5 5 8 100MHz 40 40 50 1GHz 60 60 70 10GHz 60 60 70
1 2 1
Pi Pi Pi
1500 1500 3000
GMV GMV GMV
10 10 10
Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted.
MIL PARTS CROSS REFERENCE
MIL-PRF-15733 TUSONIX No. /28-0001 4201-501 /28-0002 4201-503 /28-0003 4251-503 /33-0001 4101-502 /33-0002 4101-503 /38-0004 4601-503 /38-0005 4601-504 /43-0001 4204-501 /43-0002 4201-506 /44-0001 4251-500 /44-0002 4205-500 /44-0003 4205-501 /46-0001 4207-500 /49-0001 4601-502 /49-0006 4601-501 /49-0007 4601-500 /51-0001 4101-504 /51-0002 4151-501 Page No. 18 18 NS 12 12 NS NS 19 NS NS NS NS NS NS NS NS 12 12 MIL-PRF-15733 TUSONIX No. /61-0001 4204-500 /61-0002 4202-501 /61-0003 4206-502 /61-0004 4206-501 /61-0005 4203-502 /61-0006 4203-501 /61-0007 4203-552 /61-0008 4201-502 /61-0009 4253-500 /61-0010 4203-553 /61-0011 4203-551 /61-0012 4253-501 /61-0013 4251-502 /61-0014 4251-501 /62-0001 4101-501 /62-0002 4100-500 /62-0003 4101-505 /62-0004 4151-500 /66-0001 4101-500 Page No. 19 20 21 21 NS 20 20 18 NS 20 20 NS NS NS 12 12 12 12 12
NS indicates a part that is not shown in this catalog.
15
7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com
#6-32 UNC-2A Pi, C & L Filters and Feed-thru Capacitors
inches [mm]
.156 .015 [3.96 0.38] .375 .031 [9.53 0.79] .125 .015 [3.18 0.38] .450 .031 [11.43 0.79] .225 .015 [5.72 0.38] .156 .015 [3.96 0.38] .125 .015 [3.18 0.38] .320 .031 [8.13 0.79] .500 .031 [12.7 0.79] .225 .015 [5.72 0.38]
# 22 AWG. (.025) [0.63] .070 MAX. [1.78 MAX.] STYLE 1
.070 MAX. [1.78 MAX.] # 6 - 32 UNC - 2A STYLE 2
# 20 AWG. (.032) [0.81]
# 6- 32 UNC - 2A
.156 .015 [3.96 0.38] .125 .015 [3.18 0.38]
.320 .031 [8.13 0.79]
.500 .031 [12.7 0.79] .225 .015 [5.72 0.38]
.156 .015 [3.96 0.38] .125 .015 [3.18 0.38]
.320 .031 [8.13 0.79]
.500 .031 [12.7 0.79] .225 .015 [5.72 0.38]
# 25 AWG. (.018) [0.46] # 6 - 32 UNC - 2A STYLE 3
.050 .005 [1.27 0.13] STYLE 4
# 20 AWG. (.032) [0.81] # 6- 32 UNC - 2A
.032 .005 [0.81 0.13]
.173 .010 [4.40 0.25] .180 .010 [4.60 0.25] .039 [1.00]
.358 .020 [9.09 0.50]
.787 .031 [20.00 0.50] .225 .015 [5.72 0.38] .593 MAX. [15.10 MAX.]
.039 [1.00]
# 20 AWG. (.032) [0.81] STYLE 5 .043 MAX. [1.10 MAX.]
MAX. CAP. (Nominal) (pF)
.020 .005 [0.50 0.13] # 6- 32 UNC - 2A
TUSONIX Part Number 2430
Temperature Range Z5, Y5, X5 X7
WVDC 200 100
Notes: ** Typical Insertion Loss No Hex Nut or Lock Washer
1500 1500
Capacitance Tolerance
Please see Temperature Characteristics and EIA Codes on page 25.
Capacitance (pF)
Style
Circuit
Notes
TUSONIX Part Number Pi Configuration 4260-001 4260-002 4260-000 C Configuration 4402-016 4402-005 4402-018 4402-680 2430-003-X5F0-101M 2430-003-X5F0-102Z L Configuration 4402-063 4402-060 Drawings not to scale.
Current (A)
Working Voltage (dc) 85C 125C --400 50 100 50 300 200 200 200 100 50 50 200 50 100 50 200 100 100 100 100
Minimum No-Load Insertion Loss (dB) at 25C per MIL-Std-220 1MHz ---15 4 22 ----10 10MHz 14 18 5 35 21 40 --3 15 28 100MHz 55 65 42 45 35 47 -3 20 30 45 1GHz 70 70 70 70 50 65 -20 35 45 65 10GHz 10GHz -----65 -28 40 55 --
3 3 3 2 2 2 5 1 1 5 4
------ ** ** --
Pi Pi Pi C C C C C C L L
5500 7500 2000 50,000 10,000 100,000 5 100 1000 4700 27,000
GMV GMV GMV GMV GMV GMV MAX 20% +80-20% +80-20 GMV
3 3 3 10 10 10 10 5 5 10 10
Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted.
16
The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct.
#8-32 UNC-2A Pi, C & L Filters and Feed-Thru Capacitors
inches [mm]
.187 .015 [4.75 0.38] .312 .031 [7.92 0.79] .093 .015 [2.36 0.38] .890 .031 [22.61 0.79] .266 .015 [6.76 0.38] .187 .015 [4.75 0.38] .425 .031 [10.80 0.79] .093 .015 [2.36 0.38] .575 .031 [14.61 0.79] .266 .015 [6.76 0.38]
# 20 AWG. (.032) [0.81]
# 18 AWG. (.040) [1.02] # 8- 32 UNC - 2A .425 .031 [10.80 0.79] .562 .031 [14.27 0.79] .138 .010 [3.50 0.25] .187 .015 [4.75 0.38]
STYLE 1
.187 .010 [4.75 0.25]
STYLE 2
.906 .031 [23.01 0.79] .312 .031 [7.92 0.79]
# 8- 32 UNC - 2A
.062 .005 [1.57 0.13]
.475 .040 [12.07 1.02]
# 18 AWG. (.040)1.02]
# 8- 32 UNC - 2A
# 20 AWG. (.032) [0.81] .093 .015 [2.36 0.38] .216 .015 [5.49 0.38]
# 8- 32 UNC - 2A .050 .015 [1.27 0.38]
STYLE 3
.312 .031 [7.92 0.79] .187 .010 [4.75 0.25] .456 .093 [11.58 2.36] .276 MAX. [7.01 MAX.] .093 .010 [2.36 0.25] .216 .010 [5.49 0.25]
STYLE 4
.462 .031 [11.73 0.79] .187 .010 [4.75 0.25]
.538 .031 [13.67 0.79] .138 .010 [3.50 0.25]
.062 .005 [1.57 0.13]
# 20 AWG. (.032) [0.81]
STYLE 5
.225 .031 [5.72 0.79] .187 .015 [4.75 0.38]
# 8- 32 UNC - 2A
# 18 AWG. (.040) [1.02]
STYLE 6
.265 .031 [6.73 0.79] .187 .015 [4.75 0.38]
# 8- 32 UNC - 2A
.450 .031 [11.43 0.79] .266 .015 [6.76 0.38] .093 .015 [2.36 0.38]
.450 .031 [11.43 0.79] .266 .015 [6.76 0.38]
.093 .015 [2.36 0.38]
# 18 AWG. (.040) [1.02]
# 20 AWG. (.032) [0.81] # 8- 32 UNC - 2A
STYLE 7
.187 .015 [4.75 0.38] .320 .031 [8.13 0.79] .150 .015 [3.81 0.38]
STYLE 8
.328 .031 [8.33 0.79] .187 .015 [4.75 0.38] .123 .015 [3.12 0.38]
# 8- 32 UNC - 2A
.500 .031 [12.70 0.79] .320 .015 [8.13 0.38]
.421 .031 [10.69 0.79] .266 .015 [6.76 0.38]
# 20 AWG. (.032) [0.81]
# 18 AWG. (.040) [1.02] # 8- 32 UNC - 2A .631 .031 [16.03 0.79] .266 .015 [6.76 0.38] .187 .015 [4.75 0.38]
STYLE 9
.187 .015 [4.75 0.38] .267 .031 [6.78 0.79] .093 .015 [2.36 0.38]
STYLE 10
.328 .031 [8.33 0.79] .093 .015 [2.36 0.38]
# 8- 32 UNC - 2A .421 .031 [10.69 0.79] .266 .015 [6.76 0.38]
# 16 AWG. (.051) [1.30]
# 18 AWG. (.040) [1.02] # 8- 32 UNC - 2A
17
STYLE 11
Drawings not to scale.
STYLE 12
# 8- 32 UNC - 2A
Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted.
7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com
#8-32 UNC-2A Pi, C & L Filters and Feed-Thru Capacitors
.187 .015 [4.75 0.38] .093 .015 [2.36 0.38] .280 .031 [7.11 0.79] .850 .031 [21.59 0.79] .266 .015 [6.76 0.38] .187 .015 [4.75 0.38] .390 .031 [9.91 0.79] .150 .015 [3.81 0.38] .563 .031 [14.30 0.79] .320 .015 [8.13 0.38]
inches [mm]
# 18 AWG. (.040) [1.02]
STYLE 13
# 8- 32 UNC - 2A
# 16 AWG. (.051) [1.30]
STYLE 14
.185 [4.70] .045 [1.14] SQUARE .150 [3.81] .030 [0.76]
# 8- 32 UNC - 2A .378 [9.60] REF.
.238 [6.05]
.050 [1.27] .040 + .000 -.002 [2.02 +.000 -0.05] DIA. 45 X.005 [0.13] RADIUS
.040 [1.02]
STYLE 15
Series Temperature WVdc Number Range 200 Z5, Y5, X5 2425 100 X7
MAX. Cap. (Nominal) (pF)
.347 [8.81] REF. .497 [12.62] REF.
# 8- 32 UNC - 2A .616 .015 [15.65 0.38]
Notes: Turret Lead #18 AWG Lead 0.040 Dia. ** Typical Insertion Loss No hex nut or Lockwasher
Capacitance (pF) Capacitance Tolerance
10,000 10,000
Please see Temperature Characteristics and EIA Codes on page 25. Working Voltage (dc) 85C 125C -200 200 -200 200 200 200 --200 200 200 200 200 100 250 250 250 250 185 200 200 200 200 200 200 200 100 140 --50 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 125 125 125 125 125 125 100 100 100 100 100 100 100 100 100 100
Current (A)
Circuit
Style
Notes
TUSONIX Part Number Pi Configuration 4251-001 4201-048 4201-047 4201-502 4201-000 4201-001 4201-004 4201-006 4201-501 4201-503 4201-003 4201-050 4201-051 4201-053 4201-083 4251-004 4205-002 4205-018 4205-017 4205-001 4251-000 4251-002 C Configuration 2425-018-X5U0-101M 2425-544-X7R0-101M 2425-018-X5U0-102M 2425-544-X7R0-102P 2425-018-X5W0-502M 2425-601-X5W0-103Z 4404-001 4404-002 4404-003 L Configuration 4404-050 Drawings not to scale.
MIL-PRF15733 Number ---/61-0008 ----/28-0001 /28-0002 -----------------------
Minimum No-Load Insertion Loss (dB) at 25C per MIL-Std-220 1MHz 5 --------------10 -----5 ------10 15 20 7 10MHz 18 -4 -5 5 5 5 --5 14 14 14 18 38 --5 5 10 28 --3 3 15 20 30 34 38 27 100MHz 65 5 37 65 45 45 38 38 45 45 38 55 55 55 65 75 3 3 35 35 30 65 3 3 20 20 30 35 45 45 47 43 1GHz 70 32 60 70 65 65 63 63 60 60 63 70 70 65 70 75 16 16 60 60 65 70 20 20 35 35 45 50 55 60 65 60 10GHz ---70 70 70 70 70 60 60 70 70 70 65 70 75 45 45 60 60 65 70 28 28 40 40 50 55 -----
8 -15 15 5 -1 -1 1 1 1 4 -2 -1 -1 1 9 -9 -3 -6 -6 -3 -7 -9 -11 ** 11 ** 11 ** 11 ** 11 ** 14 ** 1 12 -10 -13 --
Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi C C C C C C C C C L
15,000 100 1000 1000 1500 1500 1500 1500 1500 1500 2000 5500 5500 5500 10,000 28,000 65 65 1500 1500 3000 12,000
GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV +80-20% GMV +100 -0% +100 -0% GMV GMV +100 -0% GMV
10 15 15 10 10 10 15 15 10 10 15 10 10 15 10 10 15 15 15 15 15 10 20 20 20 20 20 20 10 10 10 10
20% 100 20% 100 20% 1000 1000 +100 -0% 20% 5000 10,000 +80-20% GMV 27,000 GMV 50,000 GMV 100,000 22,000 GMV
Please Note: All bushing style filters include hex nut and lock washer unless otherwise noted.
18
The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct.
#8-36 UNF-2A and #12-28 UNF-2A Pi & C Filters and Feed-Thru Capacitors
.250 .015 [6.35 0.38] .187 .015 [4.75 0.38] .359 .031 .453 .031 [9.12 0.79] [11.51 0.79] .281 .015 [7.14 0.38] .187 .005 [4.75 0.13] .240 .020 [6.10 0.51] .090 .010 [2.29 0.25] .360 .020 [9.14 0.51] # 8 - 36 UNF - 2A
inches [mm]
COLOR CODE # 20 AWG. (.032) [0.81] # 12- 28 UNF - 2A .040 .005 [1.02 0.13]
.030 [0.76] .015 .005 DIA. [0.38 0.13]
STYLE 1
.250 .015 [6.35 0.38] .156 .015 [3.96 0.38] .328 .031 [8.33 0.79]
STYLE 2
.484 .031 [12.29 0.79] .312 .015 [7.92 0.38]
1.000 .031 [25.40 0.79] .250 .015 [6.35 0.38] .250 .031 [6.35 0.79] .156 .015 [3.96 0.38]
.312 .015 [7.92 0.38]
# 20 AWG. (.032) [0.81]
# 12- 28 UNF - 2A 1.131 .031 [28.73 0.79] .625 .015 [15.88 0.38] .344 [8.74] .269 .015 [6.83 0.38]
STYLE 3
.312 .015 [7.92 0.38]
STYLE 4
# 16 AWG. (.051) [1.29]
# 12- 28 UNF - 2A
.156 REF. [3.96 REF.]
.156 REF. [3.96 REF.] # 16 AWG. (.051) [1.29]
.063 [1.60]
Series Temperature WVDC Number Range 500 Z5, Y5, X5 2499 250 X7 500 Z5, Y5, X5 357 250 X7
MAX. CAP. Nominal (pF)
Notes: ** Turret Lead Typical Insertion Loss No Hex Nut Included
10,000 10,000 10,000 10,000
STYLE 5
.125 .015 [3.18 0.38] # 12-28 UNF - 2A
Please see Temperature Characteristics and EIA Codes on Page 25.
Capacitance (pF)
Current (A)
Circuit
Style
Notes
TUSONIX Part Number C Configuration 4401-005 4401-006 4401-010 4401-011 4401-003 4401-004 4401-680 4401-008 4401-009 4401-000 4401-001 4401-007 4401-002 Pi Configuration 4202-053 4202-054 4204-050 4204-051 4202-020 4202-021 4204-000 4204-001 4204-500 4204-501 C Configuration 2499-003-X5U0-102P 2499-003-X5W0-502P 2499-003-X5W0-103Z 357-001-X5W0-103Z
MIL-PRF15733 Number ---------------------/61-0001 /43-0001 -----
Working Voltage (dc) 85C 125C 70 70 70 50 150 150 300 300 300 300 300 300 300 200 200 200 200 350 350 350 350 --500 500 500 500 50 50 50 50 100 100 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200
200dc 140ac 200dc 140ac
Capacitance Tolerance
Minimum No-Load Insertion Loss (dB) at 25C per MIL-Std-220 1MHz 4 7 10 15 -----------------------10MHz 21 20 28 35 10 15 -----5 5 20 20 20 20 5 5 5 5 --3 15 20 20 100MHz 35 35 42 45 25 30 ---3 15 20 20 65 65 65 65 45 45 45 45 45 -20 30 35 35 1GHz 50 55 65 70 40 45 -5 10 20 35 35 35 70 70 70 70 70 70 70 70 70 45 35 45 50 50 10GHz 60 60 65 -50 55 -20 25 28 40 45 45 70 70 70 70 70 70 70 70 70 45 40 50 55 55
2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 1 1 3 3 1 1 1 1 4 4 4 5
- - - - - ** ** ** **
C C C C C C C C C C C C C Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi C C C C
10,000 15,000 27,000 50,000 2700 5000 5 10 25 100 500 1000 1200 5000 5000 5000 5000 1500 1500 1500 1500 1500 1500 1000 5000 10,000 10,000
GMV GMV GMV GMV GMV GMV MAX GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV +100-0% +100-0% +80-20% +80-20%
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10ac 10ac 20 20 20 20
250 250 250 250
19
Drawings not to scale.
Please note: All bushing style filters include hex nut and lock washer unless otherwise specified.
7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com
#12-32 UNEF-2A Pi, & C Filters
.250 .015 [6.35 0.38] .187 .015 [4.75 0.38] .359 .031 [9.12 0.79] .453 .031 [11.51 0.79] .281 .015 [7.14 0.38] "A"/ "B" .240 .015 [6.10 0.38] .187 .015 [4.75 0.38]
.157 .015 [3.99 0.38]
.343 .031 [8.71 0.79]
.921 .031 [23.40 0.79] .311 .015 [7.90 0.38]
STYLE 1
.250 .015 [6.35 0.38] .187 .015 [4.75 0.38]
# 20 AWG. (.032) [0.81] # 12- 32 UNEF - 2A .468 .031 [11.89 0.79] .156 .015 [3.96 0.38] .680 .031 [17.27 0.79] .405 .010 [10.29 0.25]
# 20 AWG. (.032) [0.81]
STYLE 2
.312 .015 [7.92 0.38] .406 .031 [10.31 0.79] .140 .015 [3.56 0.38]
# 12- 32 UNEF - 2A .468 .031 [11.89 0.79] .208 .015 [5.28 0.38]
# 20 AWG. (.032) [0.81]
STYLE 3
.250 .015 [6.35 0.38] .187 .015 [4.75 0.38] .156 .015 [3.96 0.38]
.125 .015 [3.17 0.38]
# 12- 32 UNEF - 2A
.062 [1.57]
# 12- 32 UNEF - 2A
STYLE 4
.712 .050 [18.08 1.27] .405 .010 [10.29 0.25]
Notes: Turret Lead
#18 AWG Lead 0.040 [1.02] Dia. "A" Dim. A in #2= .250 .015 [6.35 0.38] "B" Dim. A in #2= .235 .015 [5.97 0.38] ** Typical Insertion Loss
MAX. CAP. (Nominal) (pF)
.437 .031 [11.10 0.79]
inches [mm]
# 20 AWG. (.032) [0.81]
TUSONIX Part Number
.125 .015 [3.18 0.38] # 12- 32 UNEF - 2A
2452
STYLE 5
Temperature Range Z5, Y5, X5 X7
WVdc 500 250
1800 1800
Please see Temperature Characteristics and EIA Codes on page 25.
Capacitance (pF) Capacitance Tolerance
Style
Current (A)
Circuit
Notes
TUSONIX Part Number Pi Configuration 4207-003 4253-002 4202-050 4202-051 4203-050 4203-051 4203-053 4203-551 4203-553 4253-001 4253-000 4202-000 4203-000 4202-001 4202-501 4203-003 4203-501 4203-552 4207-000 4207-001 4202-004 C Configuration 2452-000-X7R0-101M 2452-000-X7R0-471M 2452-000-X5U0-102P Drawings not to scale.
MIL-PRF15733 Number -------/61-0011 /61-0010 -----/61-0002 -/61-0006 /61-0007 -------
Working Voltage (dc) 85C 125C 100 100 200 200 200 200 200 ----350 350 350 -350 --500 500 500 500 500 500 70 70 100 100 100 100 100
100dc 70ac 100dc 70ac
Minimum No-Load Insertion Loss (dB) at 25C per MIL-Std-220 10MHz 45 60 20 20 20 20 20 --30 45 5 5 5 -5 --5 15 5 --3 100MHz 70 75 65 65 65 65 65 65 65 65 75 45 45 45 45 45 45 65 43 55 50 3 12 20 1GHz 70 75 70 70 70 70 70 70 70 70 75 70 70 70 70 70 70 70 55 60 70 20 27 35 10GHz 70 75 70 70 70 70 70 70 70 70 75 70 70 70 70 70 70 70 55 60 70 28 27 40
3 3 1 1 2 2 2 2 2 2 3 1 2 1 1 2 2 2 5 5 1 4 4 4
--- - A B A --- A B A -- ** ** **
Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi Pi C C C
100 140 200 200 200
200dc 140ac
200
200dc 140ac 100dc 70ac
300 300 350 250 250 250
12,000 50,000 5000 5000 5000 5000 5000 5000 5000 25,000 22,000 1500 1500 1500 1500 1500 1500 5000 1200 4000 2500 100 470 1000
GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV GMV 20% 20% +100-0%
10 10 10 10 10 10 10 10ac 10ac 10 10 10 10 10 10ac 10 10ac 10ac 10 10 15 20 20 20
Please note: All bushing style filters include hex nut and lock washer unless otherwise specified.
20
The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct.
1/4-28 and 5/16-24 UNF-2A and 5/16-32 UNEF-2A Pi Filters and Feed-Thru Capacitors
inches [mm]
.375 .010 [9.53 0.25] .250 .010 [6.35 0.25] .562 .031 [14.27 0.79] .750 .031 [19.05 0.79] .437 .010 [11.10 0.25] 1.250 .031 [31.75 0.79] .750 .031 [19.05 0.79] .313 .015 [7.95 0.38] .250 .031 [6.35 0.79]
.312 .015 [7.92 0.38]
# 15 AWG. (.057) [1.45] .050 .010 [1.27 0.25] (2) PLCS. 5/16 - 32 UNEF - 2A .060 .010 [1.52 0.25]
.125 .031 [3.18 0.79]
# 16 AWG. (.051) [1.30] .219 .015 [5.56 0.38] 1/4 - 28 UNF - 2A
STYLE 1
1.750 .031 [44.45 0.79] .375 .015 [9.53 0.38] .062 .015 [1.57 0.38] .300 .015 [7.62 0.38] 5/16 - 24 UNF - 2A
STYLE 2
.375 .010 [9.53 0.25] .250 .010 [6.35 0.25] .562 .031 [14.27 0.79] .750 .031 [19.05 0.79] .437 .010 [11.10 0.25]
# 16 AWG. (.051) [1.30] .250 .003 [6.35 0.08]
.562 .031 [14.27 0.79] .875 .031 [22.23 0.79]
.438 .031 [11.13 0.79]
.050 .010 [1.27 0.25] (2) PLCS.
# 15 AWG. (.057) [1.45] .220 .010 [5.59 0.25] 5/16 - 32 UNEF - 2A
STYLE 3
STYLE 4
TUSONIX Part Number 327 2432
Temperature Range Z5, Y5, X5 X7 Z5, Y5, X5 X7
WVDC 500 250 2000 1000
MAX. CAP. (Nominal) (pF)
10,000 10,000 7,000 7,000
Notes: **
Capacitance (pF) Capacitance Tolerance
Please see Temperature Characteristics and EIA Codes on page 25. Working Voltage (dc) 85C 125C 500 500 500 500 2000 2000 2000 2000 2000 1000 --1000 250 250 250 250 1000 1000 1000 1000 1000 -500dc 350ac 500dc 350ac
5/16-24 UNF-2A Thread Typical Insertion Loss
Style
Notes
Current (A)
Circuit
TUSONIX Part Number C Configuration 327-010-X5U0-102M 327-010-X5U0-152M 327-010-X5U0-502P 327-010-X7W0-103Z C Configuration 2432-002-X5R0-101M 2432-002-X5S0-471M 2432-002-X5U0-502M 2432-002-X5W0-752Z 2432-002-X7R0-102M Pi Configuration 4206-016 4206-501 4206-502 4206-006 Drawings not to scale.
MIL-PRF15733 Number ----------/61-0004 /61-0003 --
Minimum No-Load Insertion Loss (dB) at 25C per MIL-Std-220 10MHz 3 5 15 20 --15 15 3 3 --10 100MHz 20 22 30 35 3 12 30 30 20 35 55 55 55 1GHz 35 35 45 50 20 27 45 45 35 65 70 70 70 10GHz 40 40 50 55 27 27 50 50 40 65 70 70 70
2 2 2 2 3 3 3 3 3 1 4 4 1
** ** ** ** ** ** ** ** ** -- --
C C C C C C C C C Pi Pi Pi Pi
20% 1000 1500 20% 5000 +100-0% 10,000 +80-20% 100 470 5000 7500 1000 1000 2000 2000 3000 20% 20% 20% +80-20% 20% GMV GMV GMV GMV
20 20 20 20 20 20 20 20 20 25 25ac 25ac 25
500
Please note: All bushing style filters include hex nut and lock washer unless otherwise specified.
21
7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com
Metric Bushing Filters
.905 .079 [23.00 2.00] .157.008 [4.00 0.20] .433 .039 [11.0 1.00] .118 .006 [3.00 0.15] .472 .039 [12.0 1.00] .157 .020 [4.00 0.50] .030 MAX. [0.76 MAX.] .098 MAX. [2.48 MAX.] .276.020 [7.01 0.51] .453 .039 [7.01 0.51] .649 .039 [16.48 1.00] .394 .008 [10.01 0.20] .100 MAX. [2.54 MAX.]
STYLE 1
.250.015 [6.35 0.38] .187.015 [4.75 0.38] .060 MAX. [1.52 MAX.]
.038 MAX. [0.97 MAX.]
M3 X 0.5 - 6g
.031 .002 [ 0.79 0.05]
# 16 AWG. (.051) [1.29]
STYLE 3
.921 .031 [23.39 0.79] .240 .015 [6.10 0.38] .060 MAX. [1.52 MAX.]
M5 X 0.8 - 6g .138 .020 [3.51 0.51]
.343 .031 [8.71 0.79]
inches [mm]
# 20 AWG. (.032) [0.81]
STYLE 2
.157 .015 [4.00 0.38]
M5 X 0.8 - 6g
Series Temperature WVdc Number Range 500 Z5, Y5, X5 2499 250 X7
MAX. CAP. Nominal (pF)
5000 5000
Notes: ** Typical Insertion Loss
Please see Temperature Characteristics and EIA Codes on page 25.
Capacitance (pF) Capacitance Tolerance
Current (A)
Style
Circuit
Notes
TUSONIX Part Number M3 Thread 4400-093 4400-098 4400-099 4400-094 4400-095 4400-683 4400-076 4400-096 4400-097 M5 Thread 4209-053 4209-003 2499-523-Y5R0-102P Drawings not to scale.
Working Voltage (dc) 85C 125C 70 70 50 150 300 300 300 300 150 350 350 500 50 50 50 100 200 200 200 200 100 100 200 250
Minimum No-Load Insertion Loss (dB) at 25C per MIL-Std-220 1MHz 4 10 15 ---------10MHz 20 28 35 15 5 ---10 20 5 3 100MHz 35 42 45 30 20 -3 15 25 65 45 20 1GHz 50 55 70 45 35 -20 35 40 70 70 35 10GHz 50 60 -55 45 -28 40 50 70 70 40
1 1 1 1 1 1 1 1 1 2 2 3
-----------**
C C C C C C C C C Pi Pi C
10,000 +80-20% 27,000 GMV GMV 50,000 GMV 4700 1000 GMV 5 MAX 100 GMV 470 GMV GMV 2700 5500 1500 1000 GMV GMV +100-0%
10 10 10 10 10 10 10 10 10 10 10 20
Please note: All bushing style filters include hex nut and lock washer unless otherwise specified.
22
The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct.
Coaxial Broadband Filter 1/4-28 UNF-2A
Hermetic Seal
inches [mm]
.385 MAX. [ 9.78 MAX.] # 18 (.040) AWG. [1.02] .325 MAX. [ 8.26 MAX.] A .010 [ 0.25] .385 MAX. [ 9.78 MAX.] .050 X .070 SLOT [1.27] [1.78] REF. BOTH ENDS. QUICK DISCONNECT TERMINAL - CRIMPED & SOLDERED. 1.175 MAX. [ 29.85 MAX.] .385 MAX. [9.78 MAX.]
.175 REF. [ 4.45 REF.] A .010 [ 0.25]
.175 REF. [ 4.45 REF.]
.335 MAX. [ 8.51 MAX.] B MAX.
B MAX.
.175 REF. [ 4.45 REF.] .312 REF. [ 7.92 REF.]
1/4 - 28 UNF - 2A THD. .200 .010 [5.08 0.25]
1/4 - 28 UNF - 2A THD. .200 .010 [5.08 0.25]
.624 .025 [15.85 0.64] 1/4 - 28 UNF - 2A THD. # 15 (.057) AWG. [1.45]
STYLE 1
Dim. A inch [mm] Dim. B inch [mm] .350 [8.89] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .350 [8.89] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .492 [12.50] .350 [8.89] .475 [12.07] .367 [9.32] .350 [8.89] Working Voltage (dc) 85C 125C 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 280 280 100 100 100 100 100 100 100 100 280 280 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 50 70 50 50
200dc 125ac 200dc 125ac
STYLE 2
Capacitance (pF)
STYLE 3
.200 .010 [5.08 0.25]
Circuit
Style
TUSONIX Part Number
Current (A)
Minimum No-Load Insertion Loss (dB) at 25C per MIL-Std-220 30KHz -9 9 9 9 15 15 15 15 9 9 9 9 15 15 15 15 9 9 9 9 15 15 15 15 --9 9 9 9 15 15 15 15 --100KHz -20 20 20 20 25 25 25 25 20 20 20 20 25 25 25 25 20 20 20 20 25 25 25 25 7 7 20 20 20 20 25 25 25 25 7 7 300KHz -29 29 29 29 34 34 34 34 29 29 29 29 34 34 34 34 29 29 29 29 34 34 34 34 15 15 29 29 29 29 34 34 34 34 15 15 1MHz -39 39 39 39 44 44 44 44 39 39 39 39 44 44 44 44 39 39 39 39 44 44 44 44 25 25 39 39 39 39 44 44 44 44 25 25 10MHz -52 52 52 52 60 60 60 60 52 52 52 52 60 60 60 60 52 52 52 52 60 60 60 60 40 40 52 52 52 52 60 60 60 60 40 40 1GHz -70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 60 60 70 70 70 70 70 70 70 70 60 60
X7W Temperature Characteristic .187 [4.75] 2 4601-009 .187 [4.75] 1 4600-005 .312 [7.93] 1 4600-006 .187 [4.75] 2 4601-005 .312 [7.93] 2 4601-006 .187 [4.75] 1 4600-000 .312 [7.93] 1 4600-002 .187 [4.75] 2 4601-000 .312 [7.93] 2 4601-002 .187 [4.75] 1 4600-055 .312 [7.93] 1 4600-056 .187 [4.75] 2 4601-055 .312 [7.93] 2 4601-056 .187 [4.75] 1 4600-050 .312 [7.93] 1 4600-052 .187 [4.75] 2 4601-050 .312 [7.93] 2 4601-052 X7R Temperature Characteristic .187 [4.75] 1 4600-007 .312 [7.93] 1 4600-008 .187 [4.75] 2 4601-007 .312 [7.93] 2 4601-008 .187 [4.75] 1 4600-003 .312 [7.93] 1 4600-004 .187 [4.75] 2 4601-003 .312 [7.93] 2 4601-004 .187 [4.75] 1 4600-009 .187 [4.75] 2 4601-010 .187 [4.75] 1 4600-057 .312 [7.93] 1 4600-058 .187 [4.75] 2 4601-057 .312 [7.93] 2 4601-058 .187 [4.75] 1 4600-053 .312 [7.93] 1 4600-054 .187 [4.75] 2 4601-053 .312 [7.93] 2 4601-054 .187 [4.75] 1 4600-059 .187 [4.75] 2 4601-059
C C C C C C C C C L L L L L L L L C C C C C C C C C C L L L L L L L L L L
10pF Max 0.7 F 0.7 F 0.7 F 0.7 F 1.4 F 1.4 F 1.4 F 1.4 F 0.7 F 0.7 F 0.7 F 0.7 F 1.4 F 1.4 F 1.4 F 1.4 F 0.7 0.7 0.7 0.7 1.4 1.4 1.4 1.4 .15 .15 0.7 0.7 0.7 0.7 1.4 1.4 1.4 1.4 .15 .15 F F F F F F F F F F F F F F F F F F F F
15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15
70 70 70 70 50 50 50 50
200dc 125ac 200dc 125ac
23
Drawings not to scale.
All bushing style filters include hex nut and lock washer unless otherwise noted.
7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com
Coaxial Broadband Filter 1/4-28 UNF-2A and Standard Hardware Dimensions
Notes: 12 AWG .081[2.06] Lead and X7W Temp. Characteristic
Capacitance (pF)
Notes
Circuit
Style
TUSONIX Part Number
Current (A)
Dim. A inch [mm]
Dim. B inch [mm] --------
Working Voltage (dc) 85C 125C 100 100 280 100 100 100 280 70 50
200dc 125ac
Minimum No-Load Insertion Loss (dB) at 25C per MIL-Std-220 30KHz 9 15 -9 15 15 -100KHz 20 25 7 20 25 25 7 300KHz 29 34 15 29 34 34 15 1MHz 39 44 25 39 44 44 25 10MHz 52 60 40 40 52 60 60 1GHz 70 70 60 70 70 70 60
X7R Temperature Characteristic --4600-014 3 --4600-015 3 --4600-016 3 --4600-070 3 - 4600-067 3 --4600-071 3 --4600-072 3
C C C L L L L
200dc 125ac
70 70 50
0.7 1.4 .15 0.7 1.2 1.4 .15
F F F F F F F
20 20 20 20 30 20 20
STANDARD HARDWARE DIMENSIONS
A B D (CLEAR) D
HEX NUT
C
E
C
E
TYPE I
TYPE S
NUT THREAD SIZE 4-40 UNC 6-32 UNC 6-40 UNF 8-32 UNC 8-36 UNF 12-28 UNF 12-32 UNEF 1/4-28 UNF 5/16-24 UNF 5/16-32 UNEF 3/8-32 UNEF M3 X 0.5 M5 X 0.8 6g
MOUNTING TORQUE LIMITS
2 lb.in. [.226 N-m] 2 lb.in. [.226 N-m] 3 lb.in. [.339 N-m] 5 lb.in. [.565 N-m] 1lb.in. [.113 N-m] 8 lb.in. [.904 N-m] 8 lb.in. [.904 N-m] 8 lb.in. [.904 N-m] 9 lb.in. [1.02 N-m] 9 lb.in. [1.02 N-m] 9 lb.in. [1.02 N-m] 2 lb.in. [.226 N-m] 7 lb.in. [.790 N-m]
HEX NUT A B
TYPE C I I I I I I I I I I I I S S S
LOCK WASHER D E .015 [0.38] .017 [0.43] .017 [0.43] .018 [0.46] .015 [0.38] .022 [0.56] .022 [0.56] .022 [0.56] .025 [0.63] .022 [0.56] .022 [0.56] .022 [0.56] .025 [0.63] .034 [0.86] .050 [1.27] 4. 2. 3. 1.
Characteristics
Dimensions: Inches [metric] Dimensional Tolerance: .005 [0.13], thread tolerance class 2. Standard finish: Silver Nut material: Brass Washer material: Phosphor Bronze When mounting filter without hardware, into tapped hole, the mounting torque applied to the filter body must be no more than 1/2 the torque limits listed on the chart to the left.
.187 [4.75] .062 [1.57] .187 [4.75] .062 [1.57] .187 [4.75] .062 [1.57] .250 [6.35] .075 [1.91] -.250 [6.35] .250 [6.35]
.220 [5.59] .120 [3.05] .283 [7.19] .146 [3.71] .283 [7.19] .146 [3.71] .283 [7.19] .167 [4.24] .283 [7.19] .167 [4.24] .387 [9.83] .220 [5.59] .387 [9.83] .220 [5.59] .387 [9.83] .220 [5.59] .420 [10.6] .262 [6.65] .430[10.92] .318 [8.08] .430 [10.92] .318 [8.08] .500 [12.70] .384 [9.75] .192 [4.88] .118 [2.99] .277 [7.04] .172 [4.37] .361 [9.17] .225 [5.72]
-.075 [1.91] .100 [2.54]
.250 [6.35] .075 [1.91]
.313 .015 [7.95 0.38] .375 .010 [9.53 0.25] .375 .010 [9.53 0.25] .500 .010 [12.7 0.25] .187 .010 [4.75 0.25] .125 .015 [3.18 0.38]
.090 [2.29] .090 [2.29] .090 [2.29] .062 [1.57]
.250 [6.35] .075 [1.91]
24
The products listed in this catalog are only a few of the thousands of variations that TUSONIX produces. For custom component design, please contact the factory direct.
Product Installation Recommendations and EIA codes PRODUCT INSTALLATION RECOMMENDATIONS
The components in this catalog are manufactured with ceramic dielectrics. To minimize possible damage to the components during installation, the recommendations below should be followed. For information concerning other installation requirements and/or component modifications, consult TUSONIX Customer Engineering at (520) 744-0400.
General Recommendations
Handling: Excessive force or direct impact to the component may result in breakage. Lead bending or cutting, if necessary, should be done with a support for the lead to prevent mechanical stress to the component. Components with required lead modifications are available from TUSONIX. Use a temperature controlled soldering iron with SN60 or SN63 RMA Flux core wire. Maximum soldering temperature to be 500F(260C) with a dwell time of 3 seconds maximum. The use of a heat sink between the component body and the solder joint is highly recommended. Optimum flux removal can be achieved by vapor degreasing the components immediately after the soldering operation. Total immersion of the components is not recommended.
Lead Soldering:
Flux Removal:
Solder Mount Recommendations
Mounting: Use a convection or infrared oven and SN60 or SN63 solder paste, or solder preforms, with RMA Flux. The oven profile should slowly heat the entire assembly to a reflow temperature of 430F (221C), with a rate of change not to exceed 5F,3C/Sec. and a dwell time as short as possible. Use a temperature controlled soldering iron with SN62 silver bearing (2%) RMA Flux core solder wire. The components should be preheated to 300F (150C), then soldered with a maximum temperature of 500F (260C) and a dwell of 3 seconds maximum.
Internal Electrode Soldering:
Bushing Mount Recommendations
For Mounting Torque, please see standard hardware dimensions table on page 24.
EIA/Tusonix Tolerance Codes
TEMPERATURE CHARACTERISTICS EIA Code Z5 Y5 X5 X7 EIA Code D E F P R S T U V W Temperature Range +10C to +85C -30C to +85C -55C to +85C -55C to +125C Maximum Cap. Change 3.3% 4.7% 7.5% 10% 15% 22% + 22% -33% + 22% -56% + 22% -82% + 22% -90% Nominal Capacitnce 10 pF or Less GMV 0.1 pF 0.25 pF 0.5 pF 0.3 pF 1 pF 2 pF 3% 5% 10% 2% CAPACITANCE TOLERANCE Code AA A B C D E F G H I J K L Nominal Capacitnce over 10 pF GMV +50% -20% 0.10% 0.25% 0.50% +70% -30% 1% 2% 3% +60% -40% 5% 10% +100% -40% CAPACITANCE TOLERANCE (Cont.) Nominal Capacitnce 10 pF or Less 20% 0.4 pF 0.2 pF Code M N P Q R S T U V W X Y Z Nominal Capacitnce over 10 pF 20% 30% +100% -0% 15% 2.5% +50% -15% +30% -20% +80% -0% 7% +50% -30% +40% -10% +50% -0% +80% -20%
MAX.
GMV: TUSONIX Code: Guarantied Minimum Value
25
Please note: Maximum Capacitance for each part number is determined by the required operating temperature range and maximum capacitance change.
7741 North Business Park Drive Tucson, Arizona 85743 Ph: 520-744-0400 Fax: 520-744-6155 Web site: www.tusonix.com E-mail: sales@tusonix.com
General Test Specifications
The Components shown in this catalog have been designed and subjected to the following test plan, as is applicable for the individual components. The information shown can be used as a basis for component specifications. For additional information, please consult Customer Engineering at (520) 744-0400. Filters governed by MIL-PRF-15733 shall be inspected and tested to the requirements of the specification and the applicable specification (slash) sheet.
LOT ACCEPTANCE INSPECTION: INSPECTION OR TEST Visual and Mechanical Materials, Design, Construction and Workmanship Physical Dimensions & Marking Seal (4601 Style Only) Capacitance Dissipation Factor (1/Q) Dielectric Withstanding Voltage Insulation Resistance Method 112, condition A No leaks In accordance with applicable requirements TEST METHOD PER MIL-STD-202 EXCEPT AS NOTED POST TEST REQUIREMENTS
Method 305, 1KHz, 10.2 VRMS max. +25C Within specified tolerance Method 306, 1KHz, 10.2 VRMS max. +25C 4.0% max Method 301, 2 seconds, 50 mA max. surge current, 2 times WVDC. Method 302, 50 mA max. charging current, 100VDC, 2 minutes or as specified by individual variation MIL-STD-220, 50 Ohms, +25C, no load No evidence of damage or break down. Greater than 10,000 Megohms or 100 Ohm-Farads, whichever is less. Per application requirements. 0.01 Ohms max. Per applicable requirements.
Insertion Loss
DC Resistance (4601 Style Only) MIL-PRF-15733 Solderability (5pcs) Method 208
PERIODIC QUALITY CONFORMANCE INSPECTION: A periodic quality conformance inspection program consisting of environmental and reliability testing is in place to ensure that product integrity is consistently maintained. TUSONIX on-line www.tusonix.com
The TUSONIX Web site provides visitors with a wide range of product and ordering information. At www.tusonix.com, customers can view product information and download catalogs in Adobe Acrobat(R) .pdf format. Customers can also view or link to Sales Offices, International Agents and Distributors. An on-line request form allows customers to immediately specify product requirements and request product information.
26

▲Up To Search▲

Price & Availability of 2432-002-X7R0-102M

	To Download 2432-002-X7R0-102M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .